BENZFORCE BF697560621136 Kit Holset Turbos OM617 12AN HE200 HE221

( Brand: Benzforce ), ( Manufacturer Part Number: BF697560621136 ), ( Country Of Origin: United States ), ( UPC: 697560621136 )

Review BENZFORCE Installation Kit Holset Turbos

Introducing the BenzForce BF697560621136 om617 12AN Kit, a high-performance solution designed specifically for Holset HX35, HX40, HE200, and HE221 turbos used in various Mercedes-Benz models. This comprehensive kit is engineered to provide efficient and reliable power enhancement, making it an ideal choice for enthusiasts and professionals seeking to optimize their vehicle's performance.

The BenzForce BF697560621136 kit includes a set of 12AN high-performance fuel injectors, which are meticulously calibrated to deliver precise fuel dosages. These injectors are manufactured with the highest quality materials, ensuring durability and reliability even under demanding conditions. The injectors feature a fine spray pattern that ensures optimal fuel atomization, which in turn leads to efficient combustion and improved engine performance.

The kit is also equipped with a set of high-pressure fuel pumps, which are capable of delivering the necessary fuel pressure to support the increased fuel demands of the high-performance injectors. These pumps are designed to be robust and reliable, with a robust construction that can withstand the increased fuel pressures and temperatures.

Moreover, the BenzForce BF697560621136 kit comes with all necessary wiring harnesses and connectors, making the installation process as straightforward as possible. The wiring harnesses are designed to be plug-and-play, ensuring a hassle-free installation experience.

This kit is suitable for various Mercedes-Benz models, including but not limited to, the W211 E-Class, W220 S-Class, and W251 ML. It is important to note that prior to installation, it is recommended to consult with a qualified mechanic or performance specialist to ensure proper calibration and tuning of the engine management system.

In summary, the BenzForce BF697560621136 om617 12AN Kit is a top-tier solution for Mercedes-Benz owners seeking to enhance the performance of their Holset turbos. This comprehensive kit includes high-performance fuel injectors, high-pressure fuel pumps, and all necessary wiring harnesses, making it an ideal choice for those looking to optimize their vehicle's power and efficiency.

The Holset HX35/HX40 turbochargers (Om617 12AN, part numbers: Benzforce BF697560621136 for HE200 and BF697560621137 for HE221) are popular upgrades for Mercedes-Benz vehicles with the OM617 engine. These turbochargers offer several benefits, but they also come with certain drawbacks. Here's a detailed analysis of both.

1. Increased Power: The most significant advantage of upgrading to a Holset HX35/HX40 turbocharger is the substantial power increase. These turbos provide more boost pressure, resulting in enhanced torque and horsepower. This upgrade can lead to improved acceleration and overall performance.

2. Better Response: Holset turbochargers are known for their quick response, making them a popular choice for those seeking better throttle response. The reduced lag between pressing the accelerator and feeling the engine's power delivery results in a more enjoyable driving experience.

3. Durability: Holset turbos have a reputation for being robust and reliable. The HX35/HX40 series is no exception. These turbos can handle the high temperatures and pressures generated by the OM617 engine, ensuring long-lasting performance.

1. Cost: Upgrading to a Holset HX35/HX40 turbocharger can be expensive. The cost of the kit (including the turbo, wastegate, manifold, and other necessary components) can range from several hundred to over a thousand dollars, depending on the specific application and the quality of the components.

2. Installation Complexity: Installing a Holset turbocharger on an OM617 engine can be challenging. The process involves removing the original turbocharger, installing the new manifold, wiring the new wastegate, and making various other modifications. This complexity may deter some DIY enthusiasts or those without extensive mechanical knowledge.

3. Potential Tuning Requirements: In some cases, upgrading to a Holset turbocharger may require additional tuning to ensure optimal performance. This could involve adjusting fuel and ignition maps, as well as recalibrating the engine management system.

The Holset HX35/HX40 turbocharger (Om617 12AN) is an excellent upgrade for those seeking improved power, response, and durability in their Mercedes-Benz OM617 engine vehicle. However, this upgrade comes with a significant investment in terms of cost and the complexity of installation. Furthermore, in some cases, additional tuning may be required to ensure optimal performance.

If you have the necessary mechanical skills, the budget, and the desire for enhanced performance, then upgrading to a Holset HX35/HX40 turbocharger can be a worthwhile investment. However, it's important to carefully consider the benefits and drawbacks before making a decision. If you're unsure, it may be wise to consult with a professional mechanic or performance specialist for advice.

If you're looking for a reliable and powerful turbocharger for your Mercedes-Benz OM617 engine vehicle, the Holset HX35/HX40 turbocharger (Om617 12AN) is an excellent choice. However, be prepared for the significant investment in terms of cost and the complexity of installation. It's also important to consider any potential tuning requirements. Before making a purchase, ensure that you have a clear understanding of the benefits and drawbacks and consult with a professional if necessary.

Details:

Regardless, reinstall the hose so actuator will see boost from compressor housing. The BenzForce HE221 Installation Kit for the OM617 takes headache out of physical connections. Both the compressor and turbine housings pins will need to be removed in order rotate core. BenzForce designed specifically for the OM617 with bolts, nuts, and gaskets.

Use the included copper exhaust nuts to secure actuator BenzForce bracket. BenzForce with grommet. This will allow you to completely remove the waste gate. Instructions are below.

This bracket was engineered to have the proper waste gate reload. Mount the bracket. Turbo not included. BenzForce with gasket and nuts.

The actuator comes pre-loaded from the factory so pulling should put same amount of tension on as original configuration. This adapter uses bolts to mount the manifold and studs on turbo side which is difficult find in aftermarket. Remove the waste gate hose. Mounting a Holset HE221 or other T25 frame turbo to your OM617 can be total pain in the ass but it doesn't have.

Here is what included. Install boost hose. BenzForce screws, gasket, and drain. If your engine is within the Holset requirements and would like an open fitting, please let us know in order comments.

Then pull the actuator and insert original two bolts through bracket stock. All that is needed a 4AN feed line and 12AN drain hose. The main intent is to be used in injunction with our route your compressed air through an inter cooler. Remove the waste gate actuator.

BenzForce for Holset turbos adapter clamp. Install the turbo. Reinstall the actuator. Waste gate Installation Instructions.

Put the end over pin on turbine housing and install original cotter or c-clip. BenzForce with clamp and o-ring.

part #: bf697560621136 prices

• $63.13-$335.98

specifications perfracp:

• brand: Benzforce
• mpn: Bf697560621136
• country of origin: United States
• upc: 697560621136

payments perfracp:

• credit card: Visa
• other
• wallet: Google-pay

returns perfracp:

• policy: Returns Accepted
• time: 30 Days
• paid by: Seller

shipping perfracp:

• cost: $24.10
• service: USPS Ground Advantage
• carrier: USPS
• type: Calculated
• transit: 5-11 Days
• class: Standard

seller perfracp:

• rating: 100.0%
• # reviews: 300
• city: Austin, Texas

offer perfracp:

• sold: 0
• availability: In Stock
• started: May 29, 2026
• options: Ship-to-home

general perfracp:

• condition: New other see details
• Parts Accessories > Permance Racing Parts > Other

Benzforce BF697560621136 Is Similar To:

• Benzforce Bf697560621662 Holset 102mm Exhaust V-band To 3 Inch And 3.5 Tube Adapter Hx40 he400 (46.7% similar) The adapters are made of mild steel and designed to allow 3 exhaust pipe slip inside for easy welding or a 3.5 tube on the outside adapter. length : 30.59MM. Inside diameter of exit: 77.25MM. Holset flange diameter: 102MM. Clamp included...(May 26th, 2026)
• Benzforce Bf697560621945 108mm Exhaust V-band Adapter For Holset Turbos (59.4% similar) Keep in mind that variations tube side wall thickness gauge may impact how snugly it fits. Finding an exhaust adapter for unusually sized turbo can be challenging. This adapter is designed to fit holset turbos with a 108MM v-band diameter. The kit includes the clamp which can be extremely ...(May 27th, 2026)
• Benzforce Bf697560621839 M120 Intake Manifold Egr Kit (52.6% similar) Black anodized. Our kits features include: 2 x 6061 plates. Keep your M120 intake manifold clean with these block off plates. Our kits features include 4 x M6X18 Allen or button head bolts based on availability...(May 28th, 2026)
• Benzforce Bf697560621785 M120 Head Egr Kit (46% similar) Our erg kit makes swapping your M120 into a different platform much easier. 2 x M6X1.0 - 20 Allen head bolts. Features: CBC machined from stainless steel. 2 x m6 split lock washers. Custom stamped aluminum gaskets make exclusively for Benzforce...(May 28th, 2026)
• Benzforce 613-098-01-80 Gasket For Air Charge Pipe To Mixing Chamber Om613 Om648 (34.9% similar) Features: thickness: .5MM. Material: aluminum. These gaskets are punched exclusively for Benzforce...(May 28th, 2026)
• Benzforce Bf697560621327 Om617 Barb Installation Kit For Holset Turbos He200 He221 (94% similar) Benzforce with clamp and o-ring. Reinstall the actuator. Put the end over pin on turbine housing and install original cotter or c-clip. Remove the waste gate hose. Benzforce with gasket and nuts. All that is needed a 4AN feed line and 3/4 drain hose. Here is what included. Remove the waste gate ...(May 29th, 2026)
• Benzforce Bf697560621310 Om606 He221 T25 Installation Kit For Holset Turbos Barb Fittings (76.6% similar) All that is needed a 4AN feed line and 3/4 drain hose. Our Benzforce. Put the end over pin on turbine housing and install original cotter or c-clip. This bracket was engineered to have the proper waste gate reload. Regardless, reinstall the hose so actuator will see boost from compressor housing. ...(May 29th, 2026)
• Benzforce Bf697560621297 Exhaust Gas Recirculation Egr Kit M112 M113 (53.2% similar) Our M112/M113 erg kits will keep your intake cleaner and the hot exhaust gas from robbing horsepower. Erg line gasket - to intake manifold 112 141 21 80. Intake block off plate. This kit includes: head block off plate. Erg valve gasket 112 142 02 80. Stainless bolts and washers...(May 29th, 2026)
• Benzforce Bf684417820156 12an Oil Drain Tube For Holset T3 He250 hx30 hx35 he351 he400 (52.3% similar) 2 - M8X20 stainless fasteners included. Bolts included. 6061 aluminum pan fitting. Our extended drain tube clears the holset t3 frames compressor housing allowing for a 12AN fitting. Gasket included. This will ensure proper flow of your turbos oil. 12AN fitting for oil drain line. Anodized flat ...(May 29th, 2026)
• Benzforce Bf697560621129 Om606 He221 T25 Installation Kit For Holset Turbos 12an (80.7% similar) Install boost hose. Mount the bracket. He HE221 on a stock manifold presents very tight angle. Remove the waste gate actuator. Use the included copper exhaust nuts to secure actuator Benzforce bracket. Mounting a holset HE221 or other T25 frame turbo to your OM606 can be difficult task. Reinstall ...(May 29th, 2026)
• Benzforce Bf684417820149 12an Oil Drain Tube For Holset T25 He200 He221 (65% similar) 12AN fitting for oil drain line. 6061 aluminum pan fitting. If you also consider the tight quarters of core, big an fittings can magnify headache. Anodized flat black. Finding the odd-sized oil drain for HE200 and HE221 can be a hassle. Bolts included. Gasket included. Our extended drain tube clears...(May 29th, 2026)