BENZFORCE BF697560621310 Kit Holset Turbos Barb Fittings OM606 HE221 T25

( Brand: Benzforce ), ( Manufacturer Part Number: BF697560621310 ), ( Part Type: Fitting ), ( Country Of Origin: United States ), ( UPC: 697560621310 )

Review BENZFORCE T25 Installation Kit Holset Turbos Barb Fittings

Introducing the BenzForce BF697560621310 OM606 HE221 T25 Kit for Holset Turbochargers, a high-performance upgrade solution for your Mercedes-Benz engine. This kit is specifically designed for Holset HX35 and HX40 turbochargers and is an excellent choice for those seeking to enhance the power output and efficiency of their Mercedes-Benz OM606 engine.

The BenzForce BF697560621310 OM606 HE221 T25 Kit includes a comprehensive set of barb fittings. These fittings are meticulously engineered to provide a perfect seal and ensure optimal turbocharger performance. Each fitting is manufactured from premium materials, ensuring durability and resistance to corrosion and wear.

The kit consists of a total of 11 barb fittings, including two wastegate fittings, two oil feed fittings, two oil return fittings, two water feed fittings, and one coolant return fitting. These fittings are designed to work seamlessly with the Holset turbochargers, allowing for easy installation and secure connection.

The wastegate fittings in this kit are particularly noteworthy. They are designed to provide a leak-free connection between the wastegate and the engine, ensuring optimal boost pressure control and consistent engine performance. The oil feed and oil return fittings, on the other hand, ensure proper lubrication of the turbocharger, reducing wear and ensuring long-lasting performance.

The water feed fittings in the BenzForce BF697560621310 OM606 HE221 T25 Kit are crucial for maintaining optimal engine temperature. They provide a secure connection between the engine cooling system and the turbocharger, allowing for efficient cooling and preventing potential damage caused by overheating.

This kit is an excellent choice for Mercedes-Benz enthusiasts looking to unlock the full potential of their OM606 engine. With its high-quality barb fittings, this kit not only ensures optimal turbocharger performance but also provides peace of mind, knowing that the connections between the engine and the turbocharger are secure and reliable.

In summary, the BenzForce BF697560621310 OM606 HE221 T25 Kit for Holset Turbochargers is a must-have upgrade for Mercedes-Benz OM606 engine owners. It includes a comprehensive set of barb fittings, specifically designed for Holset turbochargers, ensuring optimal performance, durability, and reliability.

The Holset HI-SCR turbocharger system, specifically the BenzForce BF697560621310 Om606 HE221 T25 kit with Barb fittings, is a popular aftermarket upgrade for Mercedes-Benz vehicles equipped with the OM606 engine. This kit is designed to replace the stock turbocharger setup and provide better performance, efficiency, and emissions reduction. Here are some pros and cons of buying this kit:

1. Improved Performance: The Holset HI-SCR turbocharger system provides better power output and torque, resulting in improved acceleration and overall performance.

2. Enhanced Efficiency: The system utilizes a variable geometry turbocharger, which delivers better boost at low engine speeds, improving fuel efficiency.

3. Reduced Emissions: The Holset HI-SCR system is designed to reduce harmful emissions by using a exhaust gas recirculation (EGR) system and selective catalytic reduction (SCR) technology.

4. Durability: The Holset HI-SCR turbocharger is known for its durability and reliability, making it a popular choice among Mercedes-Benz enthusiasts.

5. Easy Installation: The BenzForce BF697560621310 Om606 HE221 T25 kit comes with all necessary components and instructions for easy installation.

1. Cost: The Holset HI-SCR turbocharger system is a significant investment, with the cost of the kit being more expensive than a stock turbocharger.

2. Complexity: The installation process of the Holset HI-SCR turbocharger system can be complex, requiring advanced knowledge and skills to properly install and tune the system.

3. Potential Compatibility Issues: The Holset HI-SCR system may not be compatible with all Mercedes-Benz vehicles, and it is important to ensure that the kit is the correct fit for your specific vehicle model and year.

4. Maintenance: The Holset HI-SCR turbocharger system requires regular maintenance, including oil changes and filter replacements, to ensure optimal performance and longevity.

The Holset HI-SCR turbocharger system, as offered by the BenzForce BF697560621310 Om606 HE221 T25 kit with Barb fittings, provides significant performance improvements, enhanced efficiency, and reduced emissions for Mercedes-Benz vehicles equipped with the OM606 engine. However, it comes with a higher cost, complexity, and potential compatibility issues that must be considered. Ultimately, the decision to purchase this kit depends on your specific needs, budget, and technical expertise. If you are looking for a significant performance upgrade and are willing to invest the time and resources into the installation and maintenance, then the Holset HI-SCR turbocharger system is a worthwhile investment. However, if you are on a budget or are not comfortable with the complexity of the installation process, then it may be best to consider other options.

If you are considering purchasing the Holset HI-SCR turbocharger system for your Mercedes-Benz vehicle, it is recommended that you do thorough research on the specific kit and ensure that it is the correct fit for your vehicle model and year. Additionally, consider seeking the help of a professional mechanic or tuner to assist with the installation and tuning process to ensure optimal performance and longevity. Finally, be prepared for the additional cost, complexity, and maintenance requirements associated with the Holset HI-SCR turbocharger system.

Details:

All that is needed a 4AN feed line and 3/4 drain hose. Our BenzForce. Put the end over pin on turbine housing and install original cotter or c-clip. This bracket was engineered to have the proper waste gate reload.

Regardless, reinstall the hose so actuator will see boost from compressor housing. Then pull the actuator and insert original two bolts through bracket stock. Mount the bracket. Here is what included: BenzForce with gasket and nuts.

BenzForce for Holset turbos adapter clamp. Instructions are below. BenzForce with studs, nuts, and gaskets. BenzForce with gasket and bolts.

Waste gate Installation Instructions. The actuator comes pre-loaded from the factory so pulling should put same amount of tension on as original configuration. Both the compressor and turbine housings pins will need to be removed in order rotate core. Use the included copper exhaust nuts to secure actuator BenzForce bracket.

Install boost hose. The BenzForce HE221 for OM606 Kit takes the headache out of physical connections. Reinstall the actuator. Turbo not included.

BenzForce with clamp and o-ring. Remove the waste gate actuator. This will allow you to completely remove the waste gate. Install the turbo.

DCEC T25 manifold gaskets. Well no more. Remove the waste gate hose. BenzForce screws, gasket, and drain.

Mounting a Holset HE221 or other T25 frame turbo to your OM606 can be difficult task.

part #: bf697560621310 price

• $335.98

specifications perfracp:

• brand: Benzforce
• mpn: Bf697560621310
• part type: Fitting
• country of origin: United States
• upc: 697560621310

payments perfracp:

• wallet: Paypal
• other
• credit card: Discover

returns perfracp:

• policy: Returns Accepted
• paid by: Seller
• time: 30 Days

general perfracp:

• condition: New other see details
• Parts Accessories > Permance Racing Parts > Other

shipping perfracp:

• cost: $24.10
• class: Standard
• type: Calculated
• service: USPS Ground Advantage
• carrier: USPS
• transit: 4-10 Days

seller perfracp:

• rating: 100.0%
• city: Austin, Texas
• # reviews: 300

offer perfracp:

• sold: 0
• availability: In Stock
• options: Ship-to-home
• started: May 29, 2026

Benzforce BF697560621310 Is Similar To:

• Benzforce Bf697560621662 Holset 102mm Exhaust V-band To 3 Inch And 3.5 Tube Adapter Hx40 he400 (40.6% similar) The adapters are made of mild steel and designed to allow 3 exhaust pipe slip inside for easy welding or a 3.5 tube on the outside adapter. length : 30.59MM. Inside diameter of exit: 77.25MM. Holset flange diameter: 102MM. Clamp included...(May 26th, 2026)
• Benzforce Bf697560621938 Oil Cooler Fittings Pair M113 M113k M156 (50.6% similar) Don't waste your time cutting stock hose ends and welding fittings on when you can bolt these great looking replacements. Should work on M113 and M156 filter housings that run to an external cooler. 2 x M6X22 Allen stainless bolts standard socket or button head depending on availability. In addition...(May 27th, 2026)
• Benzforce Bf697560621945 108mm Exhaust V-band Adapter For Holset Turbos (55.6% similar) Keep in mind that variations tube side wall thickness gauge may impact how snugly it fits. Finding an exhaust adapter for unusually sized turbo can be challenging. This adapter is designed to fit holset turbos with a 108MM v-band diameter. The kit includes the clamp which can be extremely ...(May 27th, 2026)
• Benzforce Bf697560621839 M120 Intake Manifold Egr Kit (50% similar) Black anodized. Our kits features include: 2 x 6061 plates. Keep your M120 intake manifold clean with these block off plates. Our kits features include 4 x M6X18 Allen or button head bolts based on availability...(May 28th, 2026)
• Benzforce Bf697560621785 M120 Head Egr Kit (46.6% similar) Our erg kit makes swapping your M120 into a different platform much easier. 2 x M6X1.0 - 20 Allen head bolts. Features: CBC machined from stainless steel. 2 x m6 split lock washers. Custom stamped aluminum gaskets make exclusively for Benzforce...(May 28th, 2026)
• Benzforce 613-098-01-80 Gasket For Air Charge Pipe To Mixing Chamber Om613 Om648 (37% similar) Features: thickness: .5MM. Material: aluminum. These gaskets are punched exclusively for Benzforce...(May 28th, 2026)
• Benzforce Bf697560621563 6r80 Transmission Oil Cooler Fittings (61.4% similar) M8X1.25, 25MM long bolt included. Thread size on the adapters are 3/8 not. Doing a 6R80 swap and looking for an easy way to hook up cooling lines. This fitting kit may make your life a lot easier...(May 28th, 2026)
• Benzforce Bf697560621501 M12 To 8mm Hose Barb Banjo Fitting (61.3% similar) Maybe the Benzforce 8MM hose barb banjo will fit bill. This is a basic, low cost fitting that can provide better hose fitment the barbs used on plastic lines. The barbs are 8MM, designed for 7MM hose, and longer providing more sealing surface area. Need a hose fitting for your fuel filter housing, ...(May 28th, 2026)
• Benzforce Bf697560621600 45 T3 Barb Turbo Oil Drain He250 hx30 hx35 he351 he400 borgwarner (40.4% similar) One may also note the slot for screw facing on side of drain bend. 2 - M8X22 stainless fasteners included. 3/4 hose barb fitting for oil drain line. Our extended drain tube clears the holset t3 frames compressor housing allowing for easy access to a 3/4 hose barb and our 45 angle helps clear lot of ...(May 28th, 2026)
• Benzforce Bf697560621327 Om617 Barb Installation Kit For Holset Turbos He200 He221 (76.6% similar) Benzforce with clamp and o-ring. Reinstall the actuator. Put the end over pin on turbine housing and install original cotter or c-clip. Remove the waste gate hose. Benzforce with gasket and nuts. All that is needed a 4AN feed line and 3/4 drain hose. Here is what included. Remove the waste gate ...(May 29th, 2026)
• Benzforce Bf697560621297 Exhaust Gas Recirculation Egr Kit M112 M113 (49.7% similar) Our M112/M113 erg kits will keep your intake cleaner and the hot exhaust gas from robbing horsepower. Erg line gasket - to intake manifold 112 141 21 80. Intake block off plate. This kit includes: head block off plate. Erg valve gasket 112 142 02 80. Stainless bolts and washers...(May 29th, 2026)